AV Over IP

  • CH-U331RX_45_0821064551492
  • CH-U331RX Front-4_0821064548769
  • CH-U331RX Rear-4_0821064545969
  • CH-U331TXRX_Diagram_0821064541819

CH-U331RX

UHD HDMI/VGA over IP Receiver with KVM Extension

  • Video, audio and control reception over TCP/IP in Unicast (point-to-point) or Multicast (single-to-many, many-to-many) modes
  • Support video wall with 180° and 270° rotation
  • Video output can be scaled to a selected resolution, or left unscaled
  • The analog Line In on a connected Transmitter will send audio directly to this Receiver’s analog Line Out as well as being embedded into the HDMI output signal
  • The Mic In on the Receiver sends audio directly to the analog Line Out on the Transmitter
  • May be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)
  • Includes 3 LAN ports, allowing multiple Receivers to be daisy chained without the need for an external Gigabit Ethernet switch
  • Supports USB keyboard, mouse and storage extension
icon-74 拷貝 icon-03 拷貝 icon-21 拷貝 icon-36 拷貝
PRODUCTS FEATURED
CH-U331TX

UHD HDMI/VGA over IP Transmitter with KVM Extension

The CH-U331TX, one part of a 4K UHD Multi-Function Extension system, is able to extend HDMI or VGA signals along with KVM through Cat.5e/6/7 network cable and transmit UHD video signals, audio and USB up to 100m on a single cable. The transmission distance can be further extended (up to 100m per segment) by using gigabit network switches, allowing the user to cascade the system without signal loss or introducing delay. The Receiver unit includes a built-in 3 port Ethernet switch which can be used to extend and expand a basic system without the need for an external network switch.

CDPS-CS7

AV over IP Master Controller

This controller is a powerful and flexible solution for controlling multiple Video over IP (VoIP) extenders within same network. The user only needs to install this unit into the same local network as the extenders (Transmitter and Receiver) to easily define and configure channel routing selections, for both unicast and multicast scenarios, using the WebGUI. It is also possible to define and switch routes using customized groups or presets allowing for easy control over multiple video zones. Without the use of this centralized unit, each individual Transmitter and Receiver in the system would need to be controlled and configured directly through their own individual WebGUIs. Additionally, this unit supports controlling the matrix and video wall modes of connected VoIP units. The settings of all connected Transmitter/Receiver units, including IP address, netmask and extender status are clearly displayed within the WebGUI. The WebGUI is easily accessed via a web browser over a normal network connection or by directly connecting an HDMI display and USB keyboard & mouse to the unit. A trigger input interface is also provided to allow the easy addition of a remote control keypad, or other trigger-supporting products, which can be installed within a podium or within a table in a conference room or classroom. This interface can allow the user to activate stored presets with the simple press of a button. Standard control is available via WebGUI (remote or local), RS-232, Telnet, IR Remote and triggers.